full devices reset

[akbooer]

@JMK said in Help with Z-Way plugin:

I decided to put cmh-ludl in etc rather than in my home directory.

I originally suggest that location, in order to mimic Vera's files structure, but during openLuup's evolution it developed a virtual storage system and file aliases which means that it only needs to access folders within its own home directory tree. Even things like /www/cgi/ and /www/cgi-bin/cmh/ are handled that way.

So, really, I can't think of a good reason to put it in /etc/, indeed, I think you've found a good reason not to.

I think you'll find those two error messages come from AltUI, certainly the second one which I know to be benign.

[JMK]

Settled for 0755, seems to be OK. Thanks everyone.

[PerH]

Can't seem to get any devices in openluup!

Everything OK in Z-Way:

4 devices working perfectly:

Openluup versions:

Attributes:

Log:

2020-11-04 13:49:44.303   openLuup.scheduler:: [197] Z-Way device startup
2020-11-04 13:49:44.303   luup_log:197: ZWay: v20.4.5
2020-11-04 13:49:44.336   luup_log:197: ZWay: HomeId: c84d9ef4
2020-11-04 13:49:44.336   luup.variable_set:: 197.urn:upnp-org:serviceId:altui1.DisplayLine1 was: 0 vDevs, 0 zNodes now:  #hooks:0
2020-11-04 13:49:44.336   luup.register_handler:: global_function_name=HTTP_Z-Way_197, request=z197
2020-11-04 13:49:44.361   luup.set_failure:: status = 0
2020-11-04 13:49:44.361   luup.variable_set:: 197.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2020-11-04 13:49:44.361   luup.variable_set:: 197.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2020-11-04 13:49:44.394   luup.variable_set:: 197.urn:upnp-org:serviceId:altui1.DisplayLine1 was:  now: 0 vDevs, 0 zNodes #hooks:0
2020-11-04 13:49:44.394   luup_log:197: ZWay: Asynchronous polling
2020-11-04 13:49:44.394   luup.set_failure:: status = 0
2020-11-04 13:49:44.394   luup.variable_set:: 197.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2020-11-04 13:49:44.394   luup.variable_set:: 197.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2020-11-04 13:49:44.395   openLuup.scheduler:: [197] Z-Way device startup completed: status=true, msg=OK, name=L_ZWay2

result:

Any ideas?

[rafale77]

zway username and password set in the plugin variables?

[PerH]

Where?

I used "Actions" - login, and set "no expire" on the emerging connection in z-way..?

[rafale77]

@PerH

Go to the openLuup console from your openLuup device you can see the access to the console interface:

Then go into devices/z-way bridge and under actions, login

[PerH]

Done, no difference..

Same entrys in the startuplog as before.. ?

Noticed that "file not found: cgi/zway_cgi.lua" comes up when i try the "Configure ZWay child devices" button, is that a clue of something?

[rafale77]

that's not good. You need that file. seems like your plugin is not completely installed.
see that you have the files in this repo all installed:

GitHub - akbooer/Z-Way: Zway plugin for openLuup

Zway plugin for openLuup . Contribute to akbooer/Z-Way development by creating an account on GitHub.

the cgi file under the /cgi folder needs to be in the /cgi folder in openLuup.

[PerH]

Fixed. all files are in place, still no devices..

This is all that shows up when i try the "Configure ZWay child devices" :

[rafale77]

do you see username/password/session id in the plugin device variables?

[PerH]

SessionID at the bottom there?

[rafale77]

yes, looks like your plugin works and is communicating with z-way. Now in your z-way automation UI/API, you may not have completed interviews? Not sure. Would wait for @akbooer here. A bit surprising that you are not seeing any nodes.

[PerH]

All four connected devices have 100% interviews.
Thanks for helping so far.

[PerH]

Tried to delete the plugin and install it from appstore:

2020-11-04 20:28:49.866   luup_log:4: AltAppStore : downloading akbooer/Z-Way [master] to trash/AltAppStore/
2020-11-04 20:28:49.866   luup_log:4: AltAppStore : GitHub request: https://api.github.com/repos/akbooer/Z-Way/contents?ref=master
2020-11-04 20:28:49.875   luup_log:4: AltAppStore : error downloading: unknown error

Same issue with both master and dev branch, and any other way i try really, no idea why..

Same actually happens with all plugins now.. Great! leaving the computer for the evening.

[rafale77]

If you can, try installing the files from the github repo instead of going through the altappstore? It looks like you have some problems with it. Also from your previous screenshot, it doesn't look like your password and username are in your variables so you didn't succesfully connect to z-way. Is the IP address for z-way correct? You seem to be running both on the same machine?

[PerH]

Yes, same machine. 127.0.0.1 should work then?
There was an established connection i z-way though?
Anyway, the plugin is gone now, and i can't reinstall it.. the unknown error comes no matter what i do, and I have no idea where to look for errors..
How do I install it directly from github?
The files are in cmh-ludl, but i can't create a device without an implementation file right?

[PerH]

hmm.. tried to log on to z-way using the AltUI user i created for the bridge, and sees no apps or devices.. tried with the account as "local user" and "user", no difference.. mabye thats why it showed no devices?

[Donato]

Hi akbooer,

I've defined in z-way controller a Virtual Device (a virtual binary switch) but I can't see it on openluup with z-way plugin installed while I can see a real switch.

Is it correct ? Are the z-way virtual device using different API not implemented in openluup ?

tnks

donato

[akbooer]

No, only physical Zwave devices are mapped by the bridge.